
CRB-BLUELINE
3U Small Size CompactPCI IPC Systems

172mm x 132mm x 208mm CompactPCI Rack, 4 Slots Backplane, Removable PSU

Rugged, expandable, economic - the new CRB-BLUELINE series of miniature
CompactPCI® IPC systems from EKF is suitable for all industrial requirements,
even under harsh conditions.
The small rack is built of high-quality 19-inch components. With its low
dimensions of only 172x132x208mm (3U/30HP), the BLUE LINE provides space for a
maximum of 4 CompactPCI modules (single size Eurocard style). The BLUE LINE
systems include a high-grade removable power supply.
|

|

EKF offers a wide range of scalable CPU boards suitable for the BLUE LINE
to choose from, beginning with the ULV Celeron® 400MHz processor
up to the Pentium® M 2GHz.
A mass storage device, either 2.5- or
1.8-inch hard disk, or a CompactFlash card (Microdrive), is integral part of
the CPU module. Cooling by natural convection is already sufficient for low
power processor boards.
|


|

CRB-BLUELINE System with CPU Card and I/O Boards
|

Available as accessories, the BLUE LINE can be equipped with wall or bottom mount
brackets. A silent 120mm x 120mm cooling fan unit is provided as an option for such
high performance CPU boards which require forced convection.
When combined with a CompactPCI CPU card such as the
CC2-TANGO,
C3-CAJUN
CC9-SAMBA or
CCD-CALYPSO,
a BLUE LINE system supersedes entirely an industrial PC. Another three CPCI
slots are available for application specific system expansion. Thanks to the
modular, non-proprietary concept, a BLUE LINE system can be reconfigured or
upgraded in just a few minutes, reducing potential breakdown times to a minimum.
|

|

The overall reliability of any system depends in particular on the
quality of its power supply unit. BLUE LINE systems are povided with a
removable, high-grade industrial PSU from a leading German manufacturer.
As of current, the CRB-BLUELINE systems can be equipped with PSU versions
suitable either for 120/230VAC, 24VDC or 12VDC power line input
(automotive applications).
The BLUE LINE is a long-time available and scalable IPC system, combining
high reliability and small size with an affordable price, thus forming the
better alternative compared to many other PC based solutions. Please request
for custom specific versions, tailored to your individual needs. Quality pays,
its up to you!
|

|
Technical Summary
|
|
General
|
3U rack/enclosure 30HP, shielded, tip up feet assembled, ready for installation of 1 x system slot
CompactPCI CPU card 3U/4HP (w/o companion board) or 8HP (with companion board),
3 x peripheral slot CPCI cards 3U/4HP (blind panels included), equipped with 1 x CPCI PSU 3U/10HP,
according to IEEE1101.10, shock- and vibration according to IEC 61587-1 and
Bahn-Norm BN 411002/BN 411003
|
|
Dimensions
|
- ~ 172mm (width) x 132mm (height) x 208mm (depth), measured w/o tip up feet or accessories
- ~ 166mm (height) with top mount fan unit
|
|
CompactPCI Bus
|
- 1 x P1/P2 system slot, right side (red card rails)
- 3 x P1 peripheral slots (blind panels included)
- CompactPCI 32-bit, +5V VIO (+3.3V VIO on request)
- 1 x M connector for PSU slot, left side
|
|
PSU
(AC Version)
|
- Removable, 3U/10THP, permanently short circuit proof, over-voltage protection primary/secondary
- Ambient temperature -25°C ... +70°C (derating 2%/K above 50°C), protected against overheating
- Line input 90-138VAC/187-264VAC 50/60Hz (changing automatically), input connector IEC320/C5
- Outputs +5V/8A, +3.3V/10A, M24/8 connector matching the backplane, SELV according to EN 60950
- Power cord and fastener bracket included
|
|
Fan Unit
(optional)
|
- 120mm x 120mm silent type, 5V DC, 2.1W, air flow 1.66m3/min 58.6CFM, 1850rpm, 29dbA
- provided with CRB-4(5,6)-BLUELINE
|
|
EC Regulations
|
- EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
- 2002/95/EC (RoHS)
|
|
Accessories (optional)
|
- Wall mount brackets
- Bottom mount brackets
|
technical specifications are subject to change without further notice


|

CRB-BLUELINE Rack with Wall Mount Brackets
|

|
Ordering Information |
|
Ordering Number
|
Short Description
|
|
CRB-1-BLUELINE
|
Rack 3U/30HP ~ 172mm (width) x 132mm (height) x 208mm (depth), with CompactPCI
backplane, with removable power supply 70W 120/230VAC
|
|
CRB-2-BLUELINE
|
similar to CRB-1-BLUELINE, with removable PSU 70W 24VDC
|
|
CRB-3-BLUELINE
|
similar to CRB-1-BLUELINE, with removable PSU 70W 12VDC
|
|
CRB-4-BLUELINE
|
Rack 3U/30HP ~ 172mm (width) x 166mm (height) x 208mm (depth), with top mount
fan unit, with CompactPCI backplane, with removable power supply 70W 120/230VAC
|
|
CRB-5-BLUELINE
|
similar to CRB-4-BLUELINE, with removable PSU 70W 24VDC
|
|
CRB-6-BLUELINE
|
similar to CRB-4-BLUELINE, with removable PSU 70W 12VDC
|
|
CRB-7-BLUELINE
|
Kit wall mount brackets
|
|
CRB-8-BLUELINE
|
Kit bottom mount brackets
|
|
CC2-1-TANGO
|
CPU Board 4HP with ULV Celeron® 400MHz processor
|
|
CC3-1-CAJUN
|
CPU Board 4HP with ULV Celeron® 400MHz processor
|
|
CC6-3-ACID
|
Option I/O mezzanine module (companion board) 4HP, suitable for CC2-TANGO and CC3-CAJUN
|
|
CC6-8-HDK
|
Option hard disk 2.5-inch (mounted on CC6-ACID)
|
|
CC9-1-SAMBA
|
CPU Board 4HP with ULV Celeron® M 600MHz processor
|
|
CC9-2-SAMBA
|
CPU Board 4HP with ULV Celeron® M 373 1GHz processor
|
|
CC9-3-SAMBA
|
CPU Board 4HP with LV Pentium® M 738 1.,4GHz processor
|
|
CC9-5-SAMBA
|
CPU Board 4HP with Pentium® M 745 1.8GHz processor
|
|
CCD-6-CALYPSO
|
CPU Board 4HP with Pentium® M 760 2.0GHz processor
|
|
CCA-1-LAMBADA
|
Option I/O mezzanine module (companion board) 4HP, suitable for CC9-SAMBA and CCD-CALYPSO
|
|
CCA-8-HD
|
Option hard disk 2.5-inch (mounted on CCA-LAMBADA)
|
|
CCB-1-BOSSANOVA
|
Option I/O mezzanine module (companion board) 4HP, suitable for CC9-SAMBA and CCD-CALYPSO
|
|
CCB-8-HD
|
Option hard disk 2.5-inch (mounted on CCB-BOSSANOVA)
|
Additional options and ordering numbers see product information
CC2-TANGO,
CC3-CAJUN,
CC9-SAMBA and
CCD-CALYPSO


|

CRB-BLUELINE Rack with Fan Unit
|
|